载镍沸石上NH3-TPD脱附峰的非酸性探讨

NH_3-TPD技术表征固体催化剂的酸性似乎已很成熟,其实不然。如该技术表征HZSM-5沸石时,有作者观察到773K左右的高温脱氨峰,而有些作者则检测不到。诚然,各作者间所用试样及预处理条件等存在差异,但实验装置和实验操作条件不同带来的影响也不可忽视。此外,该技术在用于表征一些新的较复杂的催化剂时,其程脱谱也会呈现出新现象,这些现象有时是不能通过酸性来解释的,这是因为NH_3作为探针分子不仅具有碱性,同时还有还原性和配位性。本文对载镍沸石上NH_3-TPD谱图中出现的某些新峰进行了剖析和归属。     

计算单向复合材料弹性模量的新公式

根据复合材料单层的实际构造，提出了串并联组合模型，采用微观力学与宏观力学相结合的方法，推导出一组计算单向复合材料弹性模量的新公式。其优点是：Ｅ１和ｖ（１２）、Ｅ２和Ｇ（１２）的计算式形式对称，结构简单，计算容易，物理意义明确。我们把由世界上许多著名学者提出的多组预测公式和本文导出式计算所得的结果与国内外已发表的硼／环氧、碳／环氧、玻璃／环氧复合材料的实验数据相比较，结果表明：导出式比其他公式精确、更有价值，可供二程设计使用。     

硅藻土增强橡胶复合材料的研究进展

硅藻土是单细胞硅藻的遗骸经自然条件形成的硅质沉积岩,因其具有质轻、大的比表面积、超强的吸附性、隔音、耐磨、耐热以及耐腐蚀等特点而被广泛应用于化工、石油、建材、生物医药卫生以及环保等众多领域。然而由于硅藻土与白炭黑的结构成分相似,白炭黑通常用作橡胶的补强填料,目前硅藻土用于橡胶补强填料的研究鲜少报道。本文综述了硅藻土的性能、硅藻土的国内外研究现状、硅藻土的改性以及硅藻土增强橡胶复合材料的制备过程,并对硅藻土增强橡胶复合材料的发展趋势做了展望。     

聚苯胺复合材料研究进展

综述了聚苯胺/无机物复合材料和聚苯胺/有机高聚物复合材料的合成方法，性能特征，并展望了聚苯胺复合材料的研究，应用前景。     

铁,钴,铜酞菁／Y型分子筛的制备,表征及催化苯酚羟化的研究

制备了铁，钴，铜酞菁／Ｙ型发子筛，利用元素分析，ＩＲ、ＵＶ－Ｖｉｓ，ＴＧ、ＢＥＴ及ＸＲＤ确定了分子筛笼中铁，钴，铜酞菁化合物的生成及其晶体结构，考察了实验参数对苯酚的转化率及产物选择性的影响。     

Preparation and characterization of silicalite-1 membranes prepared by secondary growth of seeds with different crystal sizes

MFI-type zeolite particles of 0.1–1 μm in diameter were prepared by adjusting tetra-n-propylammonium hydroxide (TPAOH) and water contents in synthesis mixtures. Using those particles as seeds, MFI-type zeolite membranes were prepared on the surface of a porous mullite tube by secondary growth. The membranes were formed as polycrystalline zeolite layers on and inside the porous support, and the membranes were composed of the [h 0 h]-oriented crystallites. The membrane consisting of a-oriented crystallites could be also prepared. However, the a-oriented zeolite layers were not active on the permeation properties of butanes. Rather the size and loaded amount of the seed particles influenced on the permeation properties through the membranes. As a result, the n-C₄H₁₀/i-C₄H₁₀ permselectivity could be increased to 220 by adjusting the size and the loaded amount of particles. These results suggest that the number of loaded particles affects on the permeation properties through the membranes.     

Fabrication and Properties of Conducting Polypyrrole/SWNT‐PABS Composite Films and Nanotubes

We report the electropolymerization and characterization of polypyrrole films doped with poly(m‐aminobenzene sulfonic acid (PABS) functionalized single‐walled nanotubes (SWNT) (PPy/SWNT‐PABS). The negatively charged water‐soluble SWNT‐PABS served as anionic dopant during the electropolymerization to synthesize PPy/SWNT‐PABS composite films. The synthetic, morphological and electrical properties of PPy/SWNT‐PABS films and chloride doped polypyrrole (PPy/Cl) films were compared. Characterization was performed by cyclic voltammetry, atomic force microscopy (AFM), scanning electron microscopy (SEM) and Raman spectroscopy. SEM and AFM images revealed that the incorporation of SWNT‐PABS significantly altered the morphology of the PPy. Cyclic voltammetry showed improved electrochemical properties of PPy/SWNT‐PABS films as compared to PPy/Cl films. Raman Spectroscopy confirmed the presence of SWNT‐PABS within composite films. Field effect transistor (FET) and electrical characterization studies show that the incorporation of the SWNT‐PABS increased the electronic performance of PPy/SWNT‐PABS films when compared to PPy/Cl films. Finally, we fabricated PPy/SWNT‐PABS nanotubes which may lead to potential applications to sensors and other electronic devices.     

互通多孔碳/二氧化锰纳米复合材料的原位水热合成及电化学性能

以互通多孔碳（IPC）为载体，水热条件下在碳表面原位反应生成纳米结构的二氧化锰（MnO₂），制备互通多孔碳/二氧化锰纳米（IPC/MnO₂）复合电极材料. 采用扫描电镜（SEM），透射电镜（TEM），X射线衍射（XRD），热重分析（TGA）对其结构进行表征；采用循环伏安法、恒流充放电和交流阻抗对其电化学性能进行研究. 结果表明：生成的MnO₂均匀地负载在碳的表面，形成多层次结构，并且随着温度的升高IPC表面负载的MnO₂由纳米颗粒变为纳米片状结构；MnO₂纳米片具有典型的K-Birnessite 型晶体结构；复合物中MnO₂的含量约为34%（w）. 在100 ℃制备的IPC/MnO₂复合材料在三电极系统中最高比电容达到了411 F·g^-1；随着反应温度的升高,比容量先增长后基本保持不变. 以IPC/MnO₂为正极，活性炭（AC）为负极，1 mol·L^-1 Na₂SO₄溶液为电解液组装成IPC/MnO₂//AC 混合超级电容器，发现IPC/MnO₂电极的电容器其电位窗口从1 V扩展到1.8 V，容量可达86F·g^-1，且表现出良好的电容特性和大电流放电性能.     

Amperometric multidetection with composite enzyme electrodes

The use of composite biosensors for multianalyte detection strategies is discussed. Graphite–Teflon rigid composite biosensors offer the possibility of coimmobilization of several enzymes by simple physical inclusion in the bulk of the electrode matrix with no covalent linkages. A novel trienzyme graphite–Teflon–glucose oxidase (GOD)–alcohol oxidase (AOD)–peroxidase (HRP)–ferrocene bisosensor yielded amperometric steady-state currents similar to those obtained with graphite–Teflon–GOD–HRP–ferrocene and graphite–Teflon–AOD–HRP–ferrocene electrodes for the same concentration of glucose and ethanol, respectively. The performance of the trienzyme biosensor for multianalyte detection was evaluated with the simultaneous determination of glucose and ethanol after separation by HPLC, in samples of sweet wine. The simultaneous analysis of several analytes in the same sample should imply that, with an adequate dilution, the concentration levels of the analytes can be included within the ranges of linearity of the corresponding calibration plots. The use of two composite biosensors in a parallel configuration, so that different analytes can be simultaneously detected with no need of chromatographic separation, is also discussed. The usefulness of this approach was evaluated by the simultaneous analysis of glucose and ethanol in sweet wine, and of glucose and lactic acid in red wine.     

Where are the Sn atoms in LaSb2Snx, 0.1?x?∼0.75?

The composition range and (composite modulated) structure of compounds within the wide range non-stoichiometric LaSb₂Sn_x, 0.1?x?0.75, solid solution is carefully investigated via a combined electron diffraction, XRD and electron probe microanalysis study. Evidence for metastability of the LaSb₂Sn_x phase at the low x composition end of the solid solution is presented. Direct evidence is found for a reasonably (although by no means perfectly) well ordered Sn sub-structure which is, in general, mutually incommensurable with respect to a very well ordered underlying LaSb₂ sub-structure along both a and c directions. The overall (3+2)-d superspace group symmetry is given along with a discussion of the consequences as regards the arrangement of the Sn atoms. The Sn sub-structure c-axis cell dimension shows very little variation with composition x providing direct experimental evidence of the importance of Sn-Sn metallic bonding (along one-dimensional [001] Sn strings) for the stability of the phase.